Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. AN INTEGRAL FEATURE IS INCORPORATED FOR LOCKING ON THE THREADS OF A MATING MEMBER. DO NOT USE IF A MORE SPECIFIC ITEM NAME APPLIES. EXCLUDES COLLAR, PIN-RIVET, THREADED; INSERT, SCREW THREAD; NUT (1), SLEEVE; NUT(1), PLAIN, CAP; AND TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 92003 | PARKER HANNIFIN CORPORATION DIV AERO |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABQU | DRIVE POINT DEPTH | 0.100 INCHES NOMINAL |
| ADFK | NUT COUNTERBORE DEPTH | 0.120 INCHES NOMINAL NUT |
| ADBJ | UNDERCUT THICKNESS | 0.500 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/3,T4 FED SPEC 1ST MATERIAL RESPONSE LOCKING INSERT |
| ABPH | SMALL END DIAMETER | 2.230 INCHES MINIMUM AND 2.232 INCHES MAXIMUM |
| CQFM | HARDNESS RATING | NOT RATED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAUM | LOCKING FEATURE | PREVAILING TORQUE WITH NONMETALLIC INSERT |
| ADBM | DRIVE POINT QUANTITY | 4 |
| ADBG | NUT THICKNESS | 0.690 INCHES MINIMUM AND 0.700 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| BZRR | THREAD SERIES | UN |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| CQJX | NOMINAL THREAD SIZE | 2.000 INCHES |
| ACTA | NUT STYLE | ROUND |
| ADBH | DRIVE POINT WIDTH | 0.125 INCHES NOMINAL |
| AAWY | COUNTERBORE DIAMETER | 2.027 INCHES MINIMUM NUT AND 2.032 INCHES MAXIMUM NUT |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 LOCKING INSERT |
| ACTD | NUT DIAMETER | 2.440 INCHES MINIMUM AND 2.450 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ANODIZE NUT |
| MATT | MATERIAL | PLASTIC POLYAMIDE NUT |