Part Number
Part Number:
NSN:
NIIN:
Item Name:
VALVE , CROSS
Definition:
A VALVE WITH TWO CONNECTIONS ON THE RUN AND A THIRD AND SOMETIMES FOURTH CONNECTION AT 90 DEGREE (1.5708 RADIANS) ANGLE(S) TO THE RUN. THE FLOW IS CONTROLLED BY THE ACTION OF A STEM WHICH LIFTS A DISK PERPENDICULARLY OFF OF THE CENTER AXIS OF ITS SEAT.
CAGE Information
| Code | Company |
|---|---|
| 93181 | SNAP-TITE INC DBA AUTOCLAVE ENGINEER |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQGM | MAXIMUM OPERATING PRESSURE | 30000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| CQGM | MAXIMUM OPERATING PRESSURE | 30000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| ADSR | BONNET TYPE | INSIDE SCREW |
| AAJF | THREAD DIRECTION | RIGHT-HAND 3RD END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CWFD | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 3RD END |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 CLASS 316 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | THREAD CLASS | 2B 3RD END |
| ADQU | FLOW CONTROL DEVICE | NEEDLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AQLR | VALVE OPERATION METHOD | MANUAL |
| STYL | STYLE DESIGNATOR | ERR-090 |
| MATT | MATERIAL | STEEL COMP 316 OVERALL |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 3RD END |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| THSD | THREAD SERIES DESIGNATOR | UNF 3RD END |
| AHNC | CONNECTION STYLE | ERR-090 1ST END |
| AHNC | CONNECTION STYLE | ERR-090 2ND END |
| CQRB | SEAT ANGLE | 45.0 DEGREES 3RD END |
| ADST | BONNET ATTACHMENT METHOD | THREADED |
| AAJD | THREAD CLASS | 2B 1ST END |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES 3RD END |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |