Part Number
Part Number:
NSN:
NIIN:
Item Name:
TERMINAL BOARD
Definition:
AN ITEM CONSISTING OF INSULATING MATERIAL, WHICH IS SPECIFICALLY DESIGNED TO HAVE FASTENED THEREON, OR ON WHICH ARE FASTENED TERMINAL(S), SUCH AS SCREWS, SOLDER LUGS, SOLDER STUDS, SOLDERLESS CONNECTORS, CLIPS, AND THE LIKE. IT IS USUALLY USED FOR JUNCTIONS OR TERMINATIONS OF WIRE OR CABLE ASSEMBLIES. IT DOES NOT INCLUDE ITEMS AS DEFINED ABOVE WITH PARTS, SUCH AS RESISTORS AND CAPACITORS MOUNTED THEREON. DO NOT USE IF A MORE SPECIFIC NAME EXISTS, SUCH AS FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (AS MODIFIED); CONNECTOR (AS MODIFIED). EXCLUDES TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; AND CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. FOR ITEMS HAVING PRINTED ELECTRICAL CONDUCTOR PATHS, SEE PRINTED WIRING BOARD.
CAGE Information
| Code |
Company |
| 71279 |
INTERCONNECTION PRODUCTS INC |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| CSCS |
NONFEEDTHRU TERMINAL QUANTITY |
10 SINGLE |
| MATT |
MATERIAL |
PLASTIC POLYAMIDE BOARD AND PLASTIC PHENOLIC BOARD |
| ABCS |
TERMINAL ROW QUANTITY |
1 |
| STDC |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION |
MIL-P-81728 MIL SPEC SINGLE TREATMENT RESPONSE TERMINALS |
| AAMA |
MOUNTING HOLE DIAMETER |
0.120 INCHES |
| CRNL |
NONFEEDTHRU TERMINAL TYPE |
434 SINGLE |
| AAQL |
BODY STYLE |
STRIP TYPE |
| CWLN |
TERMINAL DESIGN |
NONFEEDTHRU |
| MATT |
MATERIAL |
COPPER ALLOY 360 TERMINALS |
| CWLG |
TERMINAL PATTERN ARRANGEMENT |
SINGLE ROW |
| BWGP |
SECTION QUANTITY |
2 |
| ABCT |
CENTER TO CENTER DISTANCE BETWEEN TERMINALS |
0.375 INCHES |
| ABDU |
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH |
2.249 INCHES |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-B-626,1/2 H FED SPEC SINGLE MATERIAL RESPONSE TERMINALS |
| ABDA |
TERMINAL QUANTITY PER SECTION |
5 |
| ABDX |
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY |
0.188 INCHES |
| ABDW |
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE |
0.250 INCHES |
| ABGT |
BOARD THICKNESS |
0.125 INCHES |
| ABCX |
BOARD CONSTRUCTION |
SCORED FOR EASY BREAKING INTO SMALLER TERMINAL BOARDS |
| ABGN |
BOARD OVERALL LENGTH |
5.250 INCHES |
| ABGP |
BOARD OVERALL WIDTH |
0.500 INCHES |
| SFTT |
SURFACE TREATMENT |
TIN ALLOY TERMINALS |
| AXHR |
MOUNTING FACILITY TYPE AND QUANTITY |
2 UNTHREADED HOLE |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
MIL-P-15047 MIL SPEC ALL MATERIAL RESPONSES BOARD |
Similar Parts