Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, AND WHOSE UNTHREADED PORTION HAS BEEN MACHINED OR GROUND IN ONE OR MORE PLACES OR OVER ITS ENTIRE LENGTH TO A MAXIMUM DIAMETER LESS THAN THE MINIMUM PITCH DIAMETER OF THE THREAD (EXCLUDES UNDERCUT FOR THREAD RELIEF). IT IS NO. 0 (0.060 IN.) (1.5 MM) OR LARGER, AND IS DESIGNED TO BE HELD OR DRIVEN WITH EITHER A WRENCH OR INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) OR BOTH IN SIZES BELOW NO. 10 (0.190 IN.) (5 MM) AND LARGER SIZES MUST HAVE A HEAD DESIGNED FOR ANY TYPE INSERTED DRIVER (EXCLUDING INTERNAL SOCKET AND MULTIPLE SPLINE TYPES) BUT MAY ALSO BE DESIGNED FOR EXTERNAL WRENCHING. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. SEE ALSO BOLT, EXTERNALLY RELIEVED BODY AND BOLT, INTERNAL WRENCHING.
CAGE Information
| Code | Company |
|---|---|
| 99592 | RAYTHEON COMPANY DBA RAYTHEON DIV IN |
Federal Supply Class
Title
SCREWS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASK | HEAD STYLE | KNURLED NO. 1 |
| AASA | THREAD LENGTH | 0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | SLOT |
| MATT | MATERIAL | STEEL COMP 303 OVERALL |
| AASB | FASTENER LENGTH | 0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,FINISH E300 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AASL | HEAD DIAMETER | 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM |
| AAWC | FIRST DIAMETER FROM HEAD | 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.390 INCHES MINIMUM AND 0.421 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 2A |
| FEAT | SPECIAL FEATURES | POINT STYLE NO. 6 0.141 IN. MIN,0.172 IN. MAX LG,85 TO 95 DEG CHAMFERED ANGLE,0.125 IN. MIN,0.135 IN. MAX DIA |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |