Part Number
Definition:
AN INTERNALLY THREADED ITEM WITH A CYLINDRICAL AND/OR SQUARE, HEXAGONAL, OCTAGONAL, OR DODECAGONAL OUTER PERIPHERY (PARALLEL TO THE THREADED AXIS) A PORTION(S) OF WHICH MAY OR MAY NOT BE ENLARGED, FORMING A FLANGE(S) AND/OR SHOULDER(S). ITEMS NOT HAVING AN ENLARGED OUTER PORTION MAY BE THREADED, A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS HAVING AN ENLARGED OUTER PORTION (FLANGE(S) OR SHOULDER(S)) MAY BE THREADED THE FULL LENGTH, THREADED A PART OF THE FULL LENGTH, OR TAPPED FROM BOTH ENDS. ITEMS TAPPED FROM BOTH ENDS SHALL HAVE EITHER RIGHT-HAND THREADS ON BOTH ENDS OR LEFT-HAND THREADS ON BOTH ENDS. FOR ITEMS CONFORMING TO ANY OF THE ABOVE AND HAVING A LENGTH OVERALL EXCEEDING TWO TIMES THE LARGEST OUTSIDE DIAMETER OR WIDTH ACROSS FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. FOR ITEMS WITH AN OUTSIDE CONTOUR THAT IS THE SAME THE FULL LENGTH, HAVING A CONTINUOUS THREAD THROUGH ITS ENTIRE LENGTH, AND THE LENGTH DOES NOT EXCEED TWO TIMES THE DIAMETER OR WIDTH ACROSS THE FLATS USE NUT (1), PLAIN (AS MODIFIED). EXCLUDES NUT (1), PLAIN, CAP. SEE ALSO TURNBUCKLE BODY.
CAGE Information
| Code | Company |
|---|---|
| 99207 | GENERAL ELECTRIC COMPANY DBA GE DIV |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| ACTA | NUT STYLE | SLEEVE |
| ANLR | CROSS-SECTIONAL SHAPE | ROUND NUT |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| AGGP | DRILLED HOLE DIAMETER | 0.043 INCHES MINIMUM AND 0.051 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5645 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CQFM | HARDNESS RATING | NOT RATED |
| CRSQ | COUNTERSINK ANGLE | 85.0 DEGREES MINIMUM NUT AND 95.0 DEGREES MAXIMUM NUT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ANLR | CROSS-SECTIONAL SHAPE | HEXAGONAL FLANGE |
| ACTD | NUT DIAMETER | 0.360 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AAWY | COUNTERBORE DIAMETER | 0.194 INCHES MINIMUM NUT AND 0.210 INCHES MAXIMUM NUT |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| ABKU | FLANGE THICKNESS | 0.115 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| ACVN | NUT LENGTH | 0.155 INCHES NOMINAL |
| AFGG | FLANGE WIDTH ACROSS FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |