Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 17576 | GOODRICH CORP |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHG | FIRST END GROOVE WIDTH | 0.1600 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHH | FIRST END GROOVE DIAMETER | 0.2500 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5659 15-5 PH ASSN STD SINGLE MATERIAL RESPONSE |
| ABHP | OVERALL LENGTH | 3.900 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | SECOND GROOVE 1.210 IN FROM FIRST END |
| AAHP | SECOND END STYLE | CIRCULAR GROOVED AND SLOTTED |
| CSYM | SURFACE FINISH | 125.0 MICROINCHES |
| AAGZ | FIRST END STYLE | CIRCULAR GROOVED AND EXTERNALLY THREADED |
| AAHX | SECOND END GROOVE DIAMETER | 0.3400 INCHES NOMINAL |
| AAHW | SECOND END GROOVE WIDTH | 0.1600 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.3125 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMFZ | SECOND END DIAMETER | 0.5600 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | F-16 ACFT |
| AKTN | SECOND END SLOT WIDTH | 0.0700 INCHES NOMINAL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.6370 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.2000 INCHES NOMINAL |
| CSPY | LARGEST STEP DIAMETER | 0.560 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 5 |
| AMCY | FIRST END DISTANCE FROM END TO GROOVE | 0.6370 INCHES NOMINAL |
| AMGR | SECOND END SLOT DEPTH | 0.0750 INCHES NOMINAL |