Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FINCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSTIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE REHOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE NONWIRE WOUND, NONPRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 08815 | HONEYWELL INTERNATIONAL INC DBA HONE |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.0 PERCENT, RATED AMPERES C AND BETTER FLOORING |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.682 INCHES MINIMUM AND 1.692 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | BALL |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1000.0 SINGLE SECTION |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 7 OCLOCK ALL PRIMARIES |
| AJYN | SCREW THREAD DIAMETER | 0.076 INCHES MINIMUM AND 0.096 INCHES MAXIMUM |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| ABXF | SHAFT LENGTH | 2.155 INCHES MINIMUM AND 2.208 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 7TH SECONDARY QUALITY |
| AAVL | PILOT DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 SINGLE SECTION |
| ADAQ | BODY LENGTH | 0.910 INCHES MAXIMUM |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AAVM | PILOT LENGTH | 0.0350 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/+10.0 SINGLE SECTION |
| ABPA | UNDERCUT DIAMETER | 1.8745 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| CBME | CUBIC MEASURE | 0.910 CUBIC INCHES |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABPC | UNDERCUT WIDTH | 0.0550 INCHES MINIMUM |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| ABWV | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 60.0 |
| AEDA | MOUNTING LIP DEPTH | 0.0550 NOMINAL MILS AND 0.0670 NOMINAL CENTIMETERS |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -400.0/+400.0 SINGLE SECTION |
| AEFK | MAXIMUM STARTING TORQUE | 0.60 INCH-OUNCES |
| FEAT | SPECIAL FEATURES | KNOB ON REAR END OF SHAFT 0.6232 IN. DIA MIN. AND 0.6238 IN. DIA MAX; 500 OHM,0.25 WATT INTERNAL RESISTOR CONNECTED TO WIPER |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| AEFZ | SHAFT RUNOUT | 0.002 INCHES |
| TEST | TEST DATA DOCUMENT | 82577-960024 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.10/+0.10 SINGLE SECTION |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 30.0 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| ABPM | BODY DIAMETER | 2.000 NOMINAL CENTIMETERS |
| AEFY | SHAFT END PLAY | 0.005 INCHES |