Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 97947 |
LISTER PETTER AMERICAS INCORPORATED |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| AMCX |
FIRST END FLAT LENGTH |
0.565 INCHES NOMINAL |
| AAHP |
SECOND END STYLE |
UNTHREADED CROSS DRILLED |
| AMCW |
FIRST END FLAT DEPTH |
0.0950 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
FIRST END FLAT WITH 0.250-28 UNF 2B,RH THREAD THRU SHAFT |
| AAGZ |
FIRST END STYLE |
FLATTED |
| AMDL |
FIRST END DIAMETER |
0.5625 INCHES NOMINAL |
| ATPC |
STEP QUANTITY |
2 |
| CSPY |
LARGEST STEP DIAMETER |
0.563 INCHES NOMINAL |
| MATT |
MATERIAL |
STEEL |
| AMFZ |
SECOND END DIAMETER |
0.3750 INCHES NOMINAL |
| ABHP |
OVERALL LENGTH |
3.000 INCHES NOMINAL |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
0.313 INCHES NOMINAL |
| AMGS |
SECOND END HOLE DIAMETER |
0.18080 INCHES NOMINAL |
Similar Parts