Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , PROPULSION , SHIP
Definition:
A SHAFT USED TO TRANSMIT TO THE PROPELLER THE TORQUE GENERATED BY THE MAIN ENGINE OF A SHIP AND ALSO TO TRANSFER THE PROPELLER THRUST TO THE THRUST BLOCK.
CAGE Information
| Code | Company |
|---|---|
| 34293 | HUNTINGTON INGALLS INCORPORATED INGA |
Federal Supply Class
Title
SHIP AND BOAT PROPULSION COMPONE
Inclusions:
INCLUDES PROPULSION SHAFTS; SHIP PROPPELLERS. MARINE TRANSMISSIONS, REVERSE AND REDUCTION GEAR TYPE.
Exclusions:
EXCLUDES ENGINES (FSC 2810, 2815); TURBINES (FSC 2825, 2835, 2840).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CPJF | FORWARD END KEYWAY | NOT PROVIDED |
| AHSU | COUPLING OUTSIDE DIAMETER | 35.500 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| AMCD | INTERMEDIATE BEARING SLEEVE OUTSIDE DIAMETER | 20.621 INCHES MINIMUM AND 20.625 INCHES MAXIMUM |
| BPJZ | USAGE LOCATION | PORT |
| ABHP | OVERALL LENGTH | 30.088 FEET NOMINAL |
| AGYE | SURFACE FINISH | GROUND OR ROUGH MACHINED OR SMOOTH MACHINED |
| CPHM | FORWARD END DESIGN | STRAIGHT |
| AMCE | INTERMEDIATE BEARING SLEEVE LENGTH | 12.709 FEET NOMINAL |
| ABMZ | DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| AARX | INSIDE DIAMETER | 13.380 INCHES MINIMUM AND 13.560 INCHES MAXIMUM |
| CPTB | COUPLING THICKNESS | 4.250 INCHES NOMINAL |
| ARQS | CONSTRUCTION | HOLLOW |
| CPTD | THREADED AFTER END | NOT INCLUDED |
| CPNK | AFTER END COUPLING DESIGN | INTEGRAL |
| CPJK | FORWARD END COUPLING OUTSIDE DIAMETER | 35.500 INCHES NOMINAL |
| CPTC | AFTER END DESIGN | STRAIGHT |
| CPJH | FORWARD END COUPLING DESIGN | INTEGRAL |
| CPJM | FORWARD END COUPLING THICKNESS | 4.250 INCHES NOMINAL |
| CPJG | AFTER END KEYWAY | NOT PROVIDED |
| CPNM | COUPLING LENGTH | 0.354 FEET NOMINAL |
| APQB | UNIT TYPE | TORSIONMETER SHAFT OR LINE SHAFT SECTION |
| CPNF | THREADED FORWARD END | NOT INCLUDED |
| CPTS | COVERING LOCATION | SURFACES BETWEEN BEARING SLEEVES AND FLANGE FACES,BORE SURFACES |
| MATL | MATERIAL | STEEL, MIL-S-23284, CLASS 3 |
| CPHX | FORWARD END DIAMETER | 20.500 INCHES MINIMUM AND 20.550 INCHES MAXIMUM |
| CPJL | FORWARD END COUPLING LENGTH | 0.442 FEET NOMINAL |
| APZX | PROTECTIVE COVERING TYPE | COMPOSITION RUST PREVENTIVE |