Part Number
Part Number:
NSN:
NIIN:
Item Name:
SAW , BAND , METAL CUTTING
Definition:
A VAIRABLE SPEED SAW, BASICALLY DESIGNED TO CUT AND/OR FILE METAL, USING A BAND SAW BLADE AND/OR A BAND FILE THAT IS REVOLVED OR ROTATED AROUND A DRIVER AND IDLER WHEEL(S). THE TEETH FORM A VERTICAL LINE WHILE PASSING THROUGH THE WORK. IT IS EQUIPPED WITH A FIXED OR TILTING HORIZONTAL TABLE FOR MOUNTING THE WORK. THE WORK TABLE AND/OR SAW FRAME MAY BE CAPABLE OF TILTING AS A UNIT TO PERMIT ANGLE CUTTING. IT MAY BE PROVIDED WITH SUFFICIENT CUTTING SPEEDS TO ALLOW FOR WOOD AND/OR OTHER MATERIAL CUTTING. EXCLUDES SAW (3), BAND, CUTOFF.
CAGE Information
| Code | Company |
|---|---|
| 18056 | DOALL BALTIMORE COMPANY |
Federal Supply Class
Title
SAWS AND FILING MACHINES
Inclusions:
INCLUDES CUTOFF MACHINES; SAW BLADE DRESSING MACHINES; RETOOTHING MACHINES.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ALDF | FRAME TYPE | RIGID |
| BWNF | BRAKING DEVICE TYPE | NONAUTOMATIC |
| BWLZ | TABLE LEFT TILT ANGLE IN DEG | 10.0 |
| AQLX | BRAKING FACILITY | INCLUDED |
| AAXX | MOUNTING TYPE | FLOOR |
| BWNG | BUILT-IN COOLANT SYSTEM | INCLUDED |
| BWMZ | CUTTING SPEED RANGE | +5.0/+5200.0 FEET PER MINUTE |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | SET OF SAW GUIDE BLOCKS W/CARBIDE BACKUP AND SAW GUIDE INSERTS,1;AIR COMPRESSOR,1;CHIP DRAWER,1;WORKLIGHT,1 |
| ACDC | CURRENT TYPE | DC |
| BWMC | BAND TYPE FOR WHICH DESIGNED | SAW BLADE |
| BWNB | CUTTING SPEED QUANTITY | 2 |
| ARDR | TABLE WIDTH | 26.500 INCHES NOMINAL |
| ARCM | DRIVE METHOD | ELECTRIC MOTOR |
| AMSE | VOLTAGE RATING | 200.0 VOLTS MINIMUM AND 575.0 VOLTS MAXIMUM |
| BWND | POWER FEED FEATURE | PROVIDED |
| BNBB | TABLE TYPE | TILTING |
| FEAT | SPECIAL FEATURES | GAVAILABLE VOLT RATING 200/208/230/460/575;BLADE ACCOM 1/16 TO 1 IN.;TWO CUTTING SPEED RANGES-LOW 5 TO 300 FPM HIGH 850 TO 5200 FPM;FEED METHOD CAN BE CUTTING BAND INTO WORK AND WORK INTO CUTTING BAND |
| ARDQ | TABLE LENGTH | 33.500 INCHES NOMINAL |
| AMZE | ROTATIONAL SPEED RATING IN RPM | 5200.0 |
| BWMG | BLADE MAXIMUM LENGTH ACCOMMODATED | 154.000 INCHES |
| BWLY | TABLE RIGHT TILT ANGLE IN DEG | 45.0 |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BWMH | BLADE MAXIMUM WIDTH ACCOMMODATED | 1.000 INCHES |
| ANCY | HORSEPOWER RATING | 3.000 |
| BWNJ | INTEGRAL GRINDER | INCLUDED |
| BWML | VISE | NOT PROVIDED |
| AQCL | THROAT DEPTH | 20.000 INCHES NOMINAL |
| BWMN | DISTANCE BETWEEN GUIDE AND TABLE | 12.000 INCHES NOMINAL |
| AMWX | FEED METHOD | CUTTING BAND INTO WORK |
| BWNH | INTEGRAL BUTT WELDER | INCLUDED |