Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 0AHP5 | CURTISS-WRIGHT CONTROLS INC DIV FLIG |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASA | THREAD LENGTH | 0.440 INCHES MINIMUM NUT THREAD |
| AASA | THREAD LENGTH | 0.560 INCHES MINIMUM STUD THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES NUT THREAD |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES STUD THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049,COND C MIL SPEC SINGLE MATERIAL RESPONSE |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| MATT | MATERIAL | STEEL COMP 8740 |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| CMLP | THREAD QUANTITY PER INCH | 28 NUT THREAD |
| FEAT | SPECIAL FEATURES | ROLLED THREADS BOTH ENDS |
| AAJE | THREAD PITCH DIAMETERS | +0.2295/+0.2305 INCHES STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 20 STUD THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.110 INCHES NOMINAL FIRST HOLE |
| ADDV | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM FIRST HOLE AND 0.072 INCHES MAXIMUM FIRST HOLE |
| THSD | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
| ABHP | OVERALL LENGTH | 2.740 INCHES MINIMUM AND 2.780 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |