Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 0AHP5 | CURTISS-WRIGHT CONTROLS INC DIV FLIG |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 1.390 INCHES NOMINAL FIRST HOLE |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 1.390 INCHES NOMINAL FIRST HOLE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD 1ST MATERIAL RESPONSE OR AMS 6382 ASSN STD 2ND MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL COMP 8735 OR STEEL COMP 4140 |
| CMLP | THREAD QUANTITY PER INCH | 18 STUD THREAD |
| ABHP | OVERALL LENGTH | 1.500 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| AASA | THREAD LENGTH | 0.560 INCHES MINIMUM NUT THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| AASA | THREAD LENGTH | 0.680 INCHES MINIMUM STUD THREAD |
| ADDV | COTTER PIN HOLE DIAMETER | 0.065 INCHES MINIMUM FIRST HOLE AND 0.072 INCHES MAXIMUM FIRST HOLE |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 24 NUT THREAD |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |