Part Number
Definition:
A REPLACEABLE DEVICE DESIGNED TO REMOVE SOLID PARTICLES FROM FLUIDS RANGING IN DENSITY FROM HEAVY LIQUIDS TO GASES. THE REMOVAL OF PARTICLES IS ACCOMPLISHED BY POROUS MATERIAL (METALLIC OR NON-METALLIC), STACKED DISKS, WOUND WIRE, OR THE LIKE, CONSTRUCTED SO THE FLUID CAN FLOW THROUGH THE DEVICE WHILE THE SOLID PARTICLES ARE RETAINED. IT MAY BE DESIGNED TO FIT INTO A FILTER, FLUID (OR SIMILAR CAVITY), OR IT MAY HAVE AN INTEGRAL OUTER CASING AND MOUNTING FACILITIES AND BE DESIGNED TO CONNECT DIRECTLY TO AN ENGINE, COMPRESSOR, OR THE LIKE. THE DEGREE OF REMOVAL OF PARTICLES MUST BE NOMINALLY RATED AT LESS THAN 50 MICRONS OR ABSOLUTELY RATED AT LESS THAN 75 MICRONS. EXCLUDES FILTER ELEMENT, AIR CONDITIONING. SEE ALSO STRAINER ELEMENT, SEDIMENT.
CAGE Information
| Code | Company |
|---|---|
| 00736 | FALLS FILTRATION TECHNOLOGIES INC. |
Federal Supply Class
Title
CENTRIFUGALS, SEPARATORS, AND PR
Inclusions:
Exclusions:
EXCLUDES LABORATORY CENTRIFUGES (FSG 65 AND 66); WATER PURIFICATION FILTERS (FSC 4610).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | FLANGE ON TOP END OF ELEMENT W/EIGHT 0.625 IN. BOLT HOLES EVENLY SPACED,13.750 IN. FLANGE OD |
| FEAT | SPECIAL FEATURES | FLANGE ON TOP END OF ELEMENT W/EIGHT 0.625 IN. BOLT HOLES EVENLY SPACED,13.750 IN. FLANGE OD |
| ADNK | FLOW DIRECTION | OUTSIDE IN |
| ADNP | DROP PRESSURE | NOT RATED |
| ABPM | BODY DIAMETER | 8.750 INCHES NOMINAL |
| ADNQ | DIFFERENTIAL PRESSURE | NOT RATED |
| AZKQ | TEMP RATING | NOT RATED |
| AZTL | BODY OVERALL LENGTH | 15.500 INCHES NOMINAL |
| APGF | DESIGN TYPE | LIMITED |
| CRXW | FILTERING MEDIA DESIGN | LAYERED SINGLE FILTERING MEDIA RESPONSE |
| ADNH | FILTRATION RATING IN MICRONS | NOT RATED |
| ADAS | BODY INSIDE DIAMETER | 6.500 INCHES NOMINAL |
| STYL | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) |
| MATT | MATERIAL | STEEL CONTAINER/CARTRIDGE |
| MATT | MATERIAL | PAPER FILTERING MEDIUM |
| MEDA | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE |