Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 0AHP5 | CURTISS-WRIGHT CONTROLS INC DIV FLIG |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABHP | OVERALL LENGTH | 1.660 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.660 INCHES MINIMUM AND 1.700 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8735 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| AASA | THREAD LENGTH | 0.700 INCHES MINIMUM STUD THREAD |
| ADDV | COTTER PIN HOLE DIAMETER | 0.096 INCHES MINIMUM FIRST HOLE AND 0.103 INCHES MAXIMUM FIRST HOLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| FEAT | SPECIAL FEATURES | THD ON STUD END 0.003 IN.OVERSIZE |
| CMLP | THREAD QUANTITY PER INCH | 16 STUD THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6320 ASSN STD SINGLE MATERIAL RESPONSE |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| ADDU | DISTANCE FROM COTTER PIN HOLE CENTERLINE TO NUT END | 0.140 INCHES NOMINAL FIRST HOLE |
| AAJD | THREAD CLASS | 3A STUD THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 24 NUT THREAD |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| AASA | THREAD LENGTH | 0.800 INCHES MINIMUM NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |