Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , SHOULDERED
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code |
Company |
| 98810 |
AEROSONIC CORPORATION |
Characteristics (Decoded)
| MRC |
Requirements Statement |
Clear Text Reply |
| AAHN |
END SIMILARITY |
NOT IDENTICAL |
| ABHP |
OVERALL LENGTH |
2.641 INCHES MINIMUM AND 2.647 INCHES MAXIMUM |
| AAGZ |
FIRST END STYLE |
PLAIN |
| MATT |
MATERIAL |
STEEL COMP 303 |
| AMFZ |
SECOND END DIAMETER |
0.1195 INCHES MINIMUM AND 0.1205 INCHES MAXIMUM |
| MDCL |
MATERIAL DOCUMENT AND CLASSIFICATION |
QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE |
| ATPC |
STEP QUANTITY |
2 |
| CSPY |
LARGEST STEP DIAMETER |
0.134 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AAHP |
SECOND END STYLE |
THREADED CROSS DRILLED (THRU HOLE) |
| AMGT |
SECOND END DISTANCE FROM HOLE CENTER TO END |
0.137 INCHES MINIMUM AND 0.143 INCHES MAXIMUM |
| AMDL |
FIRST END DIAMETER |
0.1195 INCHES MINIMUM AND 0.1205 INCHES MAXIMUM |
Similar Parts