Part Number
Part Number:
NSN:
NIIN:
Item Name:
BOLT , EYE
Definition:
AN EXTERNALLY THREADED DEVICE WHOSE THREADED PORTION IS OF ONE NOMINAL DIAMETER, WITHOUT A HEAD, BUT WITH THE UNTHREADED END EITHER BENT MORE THAN 225 DEGREES (3.925 RADIANS) OR CAST, FORGED, OR PUNCHED TO RESEMBLE AN EYE. SEE ALSO BOLT, HOOK. EXCLUDES CONNECTOR, ROD END.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AATK | EYE INSIDE DIAMETER | 0.250 INCHES MINIMUM AND 0.251 INCHES MAXIMUM |
| FEAT | SPECIAL FEATURES | SHANK IS UNDERCUT AT EYE 0.145 IN. MIN,0.165 IN. MAX W,0.285 IN. MIN,0.288 IN. MAX DIA,EYE IS DRILLED THROUGH LONG CROSS SECT.,0.094 IN. MIN,0.097 IN. MAX |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL OR MIL-S-6758,PHYSICAL COND C,SURFACE COND 4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AAJD | THREAD CLASS | 3A |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 1,CLASS 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CRHT | DISTANCE FROM CENTER OF EYE TO SHANK END | 1.250 INCHES NOMINAL |
| MATT | MATERIAL | STEEL OVERALL |
| CWXM | EYE OUTSIDE WIDTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| THSD | THREAD SERIES DESIGNATOR | UNC |
| CQBC | MINIMUM TENSILE STRENGTH | 150000 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 0.835 INCHES MINIMUM AND 0.855 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.375 INCHES |
| AAUA | EYE STOCK THICKNESS | 0.372 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| AATR | SHANK LENGTH | 1.390 INCHES MINIMUM AND 1.420 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.485 INCHES MINIMUM AND 1.515 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |