Part Number
Definition:
A WASHER, ROUND IN SHAPE, HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. EITHER OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILAR SHAPED RECESS. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING, SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.891 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.100 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 /CANCELLED/ FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDERED AND RECESSED |
| ABKV | OUTSIDE DIAMETER | 2.220 INCHES NOMINAL |
| ABMG | SHOULDER HEIGHT | 0.100 INCHES NOMINAL |
| CSTM | RECESS ANGLE | 90.0 DEGREES NOMINAL |
| AAVH | SHOULDER DIAMETER | 1.850 INCHES NOMINAL |