Part Number
Definition:
A BOLTLIKE ITEM HAVING A CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE WHICH MAY EXTEND A PART OR THE FULL LENGTH OF THE ITEM. IT HAS A HOLE(S) PERPENDICULAR TO THE AXIS, JOINING OR PASSING THROUGH THE CONCENTRIC HOLE ALONG THE LONGITUDINAL CENTERLINE. THE ITEM IS DESIGNED TO DISTRIBUTE FLUID, AIR, OR LUBRICANT THROUGH ITS BODY TO A MATING ITEM, SUCH AS A CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, BEARING(S), BUSHING(S), OR THE LIKE. THE ITEM MUST BE CAPABLE OF ATTACHING TO A BLOCK FITTING AND/OR A TUBING LINE OR BE DESIGNED TO ACCOMMODATE A FITTING, LUBRICATION. EXCLUDES BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; AND BUSHING, MACHINE THREAD. SEE ALSO PIN, VEHICULAR LEAF SPRING SHACKLE.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
HOSE, PIPE, TUBE, LUBRICATION, A
Inclusions:
INCLUDES ADAPTERS; BENDS; CAPS; CLAMPS; CONNECTORS; COUPLINGS; CROSSES; ELBOWS; EXPANSION JOINTS; FERRULES; FLANGES; LATERALS; LUBRICATION FITTINGS; MANIFOLDS; NIPPLES; NOZZLES; OUTLETS; PLUGS; REDUCERS; SWING AND SWIVEL JOINTS; TEES; TRAPS; UNIONS; WYES.
Exclusions:
EXCLUDES AIR CONDITIONING-HEATING FITTINGS (FSC 4520); BITUMINIZED FIBER AND CONCRETE FITTINGS (FSC 5630); CONDUIT BOXES AND FITTINGS (FSC 5975); DOWNSPOUT FITTINGS (FSC 5670); MEDICAL AND SURGICAL FITTINGS (FSC 6515); LABORATORY FITTINGS (FSC 6640); POST CAPS AND RAIL ENDS (FSC 5660); MACHINE THREAD BUSHINGS AND PLUGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BBKR | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 1.247 INCHES MINIMUM AND 1.252 INCHES MAXIMUM |
| CQMM | FIRST END THREAD SERIES DESIGNATOR | UNF |
| CQPR | FIRST END SEAT ANGLE | 45.0 DEGREES NOMINAL |
| BBKY | FIRST RADIAL FLUID HOLE DIAMETER | 0.162 INCHES MINIMUM AND 0.182 INCHES MAXIMUM |
| BBLD | LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 1.646 INCHES MINIMUM AND 1.666 INCHES MAXIMUM |
| BBDF | WRENCHING FEATURE STYLE | HEXAGON |
| ATKZ | FIRST END THREAD LENGTH | 0.318 INCHES MINIMUM AND 0.344 INCHES MAXIMUM |
| ADDV | COTTER PIN HOLE DIAMETER | 0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM |
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| CQKK | FIRST END THREAD QUANTITY PER INCH | 20 |
| BBKK | DISTANCE FROM BOLT END TO HOLE CENTER | 1.716 INCHES MINIMUM AND 1.756 INCHES MAXIMUM |
| BBLF | WRENCHING FEATURE HEIGHT | 0.143 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 1.834 INCHES MINIMUM AND 1.854 INCHES MAXIMUM |
| ASDB | WIDTH ACROSS FLATS | 0.688 INCHES NOMINAL |
| BBKL | FIRST DIAMETER FROM WRENCHING FEATURE | 0.430 INCHES MINIMUM AND 0.432 INCHES MAXIMUM |
| AAWX | CONCENTRIC HOLE DEPTH | 1.120 INCHES MINIMUM AND 1.180 INCHES MAXIMUM |
| AAQL | BODY STYLE | PLAIN |
| CQBC | MINIMUM TENSILE STRENGTH | 10000 POUNDS PER SQUARE INCH |
| AAXC | CONCENTRIC HOLE DIAMETER | 0.162 INCHES MINIMUM AND 1.182 INCHES MAXIMUM |
| ACLK | FIRST END THREAD CLASS | 3A |
| BBLB | DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.021 INCHES MINIMUM AND 1.041 INCHES MAXIMUM |
| ACKN | FIRST END STYLE DESIGNATOR | FLARED |