Part Number
Definition:
A NUT, CIRCULAR IN SHAPE, WHICH MAY HAVE WRENCHING FACILITIES SUCH AS FLATS, HOLES, PROTRUSIONS, SLOTS OR SPLINES IN OR ON THE PERIPHERY OR IN THE FACE OPPOSITE THE BEARING SURFACE. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE OUTSIDE DIAMETER, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. SEE ALSO NUT (1), PLAIN, KNURLED. (WHEN HEIGHT OR THICKNESS AND/OR OUTSIDE DIAMETER IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 00088 | ROYAL OAK GAGE INC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQJX | NOMINAL THREAD SIZE | 1.875 INCHES |
| ACTD | NUT DIAMETER | 2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM |
| ABQU | DRIVE POINT DEPTH | 0.160 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM NUT AND 92.0 DEGREES MAXIMUM NUT |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| ADBM | DRIVE POINT QUANTITY | 6 |
| ADBG | NUT THICKNESS | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| BZRR | THREAD SERIES | UN |
| ACTA | NUT STYLE | ROUND |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6323 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| ADBH | DRIVE POINT WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |