Part Number
Part Number:
NSN:
NIIN:
Item Name:
BRACKET , ANGLE
Definition:
A RIDGE ITEM, USUALLY OF FLAT MATERIAL, FORMED INTO A DIHEDRAL ANGLE (GENERALLY A RIGHT ANGLE) WHICH MAY BE REINFORCED; IT IS DESIGNED TO POSITION, ALIGN, OR SUPPORT AN ITEM(S) IN RELATION TO ANOTHER. EXCLUDES BRACE (AS MODIFIED); BRACKET (1), MOUNTING; AND BRACKET, SHELF.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 3.700 INCHES NOMINAL |
| CSSQ | FIRST LEG ANGLE | 120.0 DEGREES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | ANGLE |
| ADLL | SECOND LEG LENGTH | 1.170 INCHES MINIMUM AND 1.230 INCHES MAXIMUM |
| AHQN | FIRST LEG WIDTH | 3.670 INCHES MINIMUM AND 3.730 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/5,ALCLAD T3 FED SPEC SINGLE MATERIAL RESPONSE |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | 4001,FSCM 97499 MFR REF SINGLE TREATMENT RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| AHLP | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.470 INCHES MINIMUM AND 1.530 INCHES MAXIMUM |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AKBU | SECOND LEG STYLE | SQUARE |
| AHPW | FIRST LEG THICKNESS | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.208 INCHES NOMINAL |
| ADLK | FIRST LEG LENGTH | 0.720 INCHES MINIMUM AND 0.780 INCHES MAXIMUM |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AHLK | FIRST LEG HOLE DIAMETER | 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | SQUARE |
| HEAT | HEAT TREATMENT | T-3 SOLUTION HEAT TREATED |
| AHPX | SECOND LEG THICKNESS | 0.070 INCHES MINIMUM AND 0.090 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.070 INCHES MINIMUM AND 1.130 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 |
| CSSP | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.320 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |