Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 14414 | EATON CORP FORESTRY AND CONSTRUCTION |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| BCLZ | DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.453 INCHES NOMINAL |
| BCND | MAXIMUM RATED ARMATURE SPEED IN RPM | 4000 |
| ZZZV | FSC APPLICATION DATA | ENGINE ELECTRICAL SYSTEM,NONAIRCRAFT |
| CMLK | MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 20.0 |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 9.026 INCHES MINIMUM AND 9.036 INCHES MAXIMUM |
| CMLM | MOUNTING HOLE THREAD QUANTITY PER INCH | 16 |
| ANTX | DISTANCE FROM END TO KEYWAY CENTER | 1.375 INCHES NOMINAL |
| ABPT | SECOND STEP DIAMETER | 0.874 INCHES MINIMUM AND 0.8745 INCHES MAXIMUM |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE |
| AHZV | SUBMERSIBILITY | NONSUBMERSIBLE |
| AWDP | THREAD DIAMETER | 0.375 INCHES NOMINAL |
| ABFF | FURNISHED ITEMS | WOODRUFF KEY |
| BCMC | ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 159.0 |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.875 INCHES NOMINAL |
| ACJC | MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| BCGG | MINIMUM CURRENT CUT-IN SPEED IN RPM | 1275 |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 10.151 INCHES MINIMUM AND 10.161 INCHES MAXIMUM |
| ABVA | UNTHREADED PORTION LENGTH | 1.312 INCHES NOMINAL |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | NOT RATED |
| BCGD | ARMATURE MINIMUM SPEED IN RPM AT FULL CURRENT OUTPUT | 1700 |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| CMLP | THREAD QUANTITY PER INCH | 16 |
| CMLN | MOUNTING HOLE THREAD CLASS | 2B |
| ABRR | KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| CFHL | THREAD CLASS | 2A |
| BZRR | THREAD SERIES | UNC |
| ADER | MOUNTING STYLE | BRACKET MTD W/THREE MTG HOLES, TOP HOLE THREADED |
| ELEC | VOLTAGE IN VOLTS | 24.0 |
| CMLL | MOUNTING HOLE THREAD DIAMETER | 0.375 INCHES NOMINAL |
| AFYS | KEYWAY LENGTH | 0.750 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.766 INCHES NOMINAL |