Part Number
Part Number:
NSN:
NIIN:
Item Name:
CLUTCH , SLIDING SLEEVE , VEHICULAR
Definition:
AN INTERNALLY SPLINED METALLIC CLUTCH, OPERATING ON A SPLINED SHAFT, DESIGNED TO TRANSMIT MOTION OR POWER TO AN ABUTTING SHAFT BY MEANS OF ENGAGING THE EXTERNAL SPLINES ON THE DRIVEN SHAFT. USUALLY MANUALLY OPERATED.
CAGE Information
| Code | Company |
|---|---|
| 24617 | GENERAL MOTORS CORP |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BSNZ | FORK RACE LOCATION | LOCATED 0.530 IN. FROM END OF CLUTCH |
| BSNZ | FORK RACE LOCATION | LOCATED 0.530 IN. FROM END OF CLUTCH |
| ABHP | OVERALL LENGTH | 1.750 INCHES NOMINAL |
| BSNY | FORK RACE WIDTH | 0.436 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| BSPC | END CHAMFER DIMENSIONS | 3/8 BY 30 DEG CHAMFER |
| AXYS | SPLINE TYPE | STRAIGHT |
| ABSA | SPLINE QUANTITY | 16 |
| ABPZ | END RADIUS | 0.2500 INCHES NOMINAL |
| ABHE | OUTSIDE DIAMETER | 2.688 INCHES NOMINAL |
| AAUJ | SPLINE MAJOR DIAMETER | 1.711 INCHES MINIMUM AND 1.721 INCHES MAXIMUM |
| AXFH | SPLINE LENGTH | 1.750 INCHES NOMINAL |
| MATT | MATERIAL | STEEL |
| BSPB | END CONFIGURATION | ONE END CHAMFERED, ONE END INVERTED ROUND |
| ALME | MATERIAL HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM |
| AAUH | SPLINE MINOR DIAMETER | 1.502 INCHES MINIMUM AND 1.507 INCHES MAXIMUM |
| BSNX | FORK RACE DIAMETER | 2.250 INCHES NOMINAL |
| ZZZV | FSC APPLICATION DATA | TRANSFER TRANSMISSION ASSEMBLY,VEHICULAR |