Part Number
Part Number:
NSN:
NIIN:
Item Name:
BRACKET , DOUBLE ANGLE
Definition:
A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH ARE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
HARDWARE, COMMERCIAL
Inclusions:
INCLUDES ACCESS COVERS; BUMPERS; CASTERS; CABINET AND DOOR HARDWARE; CLEVISES; HINGES; LATCHES; STRAPS AND STRAPPING; TURNBUCKLES; WEBBED STRAPS.
Exclusions:
EXCLUDES WEAPONS SYSTEM HARDWARE (FSC 5342).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| CSSR | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| AHQN | FIRST LEG WIDTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| AHPW | FIRST LEG THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AHLT | SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 0.372 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |
| AHQA | CENTER SECTION WIDTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.078 INCHES MINIMUM AND 1.158 INCHES MAXIMUM |
| AHLF | SECOND LEG WIDTH | 2.970 INCHES MINIMUM AND 3.030 INCHES MAXIMUM |
| AHPX | SECOND LEG THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| ACHY | MOUNTING HOLE TYPE | COUNTERSUNK |
| AHLU | SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 0.372 INCHES MINIMUM AND 0.392 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,0 FED SPEC SINGLE MATERIAL RESPONSE |
| SFTT | SURFACE TREATMENT | ANODIZE |
| AHPZ | CENTER SECTION HEIGHT | 3.020 INCHES MINIMUM AND 3.080 INCHES MAXIMUM |
| AHQU | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM |
| AHQB | CENTER SECTION THICKNESS | 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| AHLN | SECOND LEG HOLE DIAMETER | 0.146 INCHES MINIMUM AND 0.176 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 |
| FEAT | SPECIAL FEATURES | CENTER HOLE 0.483 IN. MIN,0.490 IN. MAX DIA |
| AKBU | SECOND LEG STYLE | SQUARE |
| ADLK | FIRST LEG LENGTH | 0.740 INCHES MINIMUM AND 0.800 INCHES MAXIMUM |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| AHLK | FIRST LEG HOLE DIAMETER | 0.208 INCHES MINIMUM AND 0.214 INCHES MAXIMUM |
| ADLL | SECOND LEG LENGTH | 1.680 INCHES MINIMUM AND 1.740 INCHES MAXIMUM |
| AJZU | FIRST LEG STYLE | SQUARE |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.350 INCHES MINIMUM AND 0.410 INCHES MAXIMUM |
| CSSQ | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |