Part Number
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 29552 | HOWARD CLOCK PRODUCTS INC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MATT | MATERIAL | ALUMINUM ALLOY 2011 OVERALL OR ALUMINUM ALLOY 2017 OVERALL |
| BZRR | THREAD SERIES | UNF |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/3 TEMPER T3 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-225/5 TEMPER T4 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| CRSQ | COUNTERSINK ANGLE | 80.0 DEGREES MINIMUM NUT AND 95.0 DEGREES MAXIMUM NUT |
| CQJX | NOMINAL THREAD SIZE | 0.190 INCHES |
| CQFM | HARDNESS RATING | NOT RATED |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 TYPE 2 CLASS 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ASDB | WIDTH ACROSS FLATS | 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM |
| AZKQ | TEMP RATING | NOT RATED |
| ACTA | NUT STYLE | HEXAGON |
| AAJD | THREAD CLASS | 2B |
| ADEA | NUT HEIGHT | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| CRTM | BEARING SURFACE TYPE | FLAT |
| CMLP | THREAD QUANTITY PER INCH | 32 |