Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 1LQK8 | AGILENT TECHNOLOGIES INC. DIV AGILEN |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -70.0/+70.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 200.0 OHMS C AND BETTER FLOORING |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 1.0 7TH SECONDARY QUALITY |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 310.0 NOMINAL |
| ABPM | BODY DIAMETER | 0.313 NOMINAL CENTIMETERS |
| ADAQ | BODY LENGTH | 0.516 INCHES MAXIMUM |
| AEFD | ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 NOMINAL INCHES |
| AAQL | BODY STYLE | CYLINDRICAL |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| APXH | TERMINAL LOCATION | REAR END |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 SINGLE SECTION |
| ABJT | TERMINAL LENGTH | 0.200 INCHES MINIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 70.0 SINGLE SECTION |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 300.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| CBME | CUBIC MEASURE | 0.065 CUBIC INCHES |
| AEFM | MAXIMUM STOP TORQUE | 15.00 INCH-OUNCES |