Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 6.870 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5622 TY 1 COND-H1075 ASSN STD SINGLE MATERIAL RESPONSE |
| CSPY | LARGEST STEP DIAMETER | 1.812 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.9970 INCHES MINIMUM AND 0.9980 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| AMGA | SECOND END SPLINE LENGTH | 1.750 INCHES NOMINAL |
| AAHP | SECOND END STYLE | SPLINED (STRAIGHT) |
| AMDL | FIRST END DIAMETER | 0.9992 INCHES MINIMUM AND 0.9997 INCHES MAXIMUM |
| ATPC | STEP QUANTITY | 3 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 0.8490 INCHES MINIMUM AND 0.8540 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES |
| BDSR | SECOND END SPLINE QUANTITY | 10 |