Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 53711 | NAVAL SEA SYSTEMS COMMAND |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CXYR | SECOND END ANGLE BETWEEN FLATS | 90.0 DEGREES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAGZ | FIRST END STYLE | PLAIN |
| CTBM | SECOND END STEP LENGTH | 0.7500 INCHES NOMINAL |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES |
| FEAT | SPECIAL FEATURES | THIRD FLAT 90.0 DEG |
| AMDL | FIRST END DIAMETER | 0.7100 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.2040 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | W/S SEAWOLF CLASS SSN |
| MATT | MATERIAL | STEEL |
| ATPC | STEP QUANTITY | 3 |
| ABHP | OVERALL LENGTH | 6.300 INCHES NOMINAL |
| AAHP | SECOND END STYLE | TWO FLATS |
| CSPY | LARGEST STEP DIAMETER | 0.710 INCHES NOMINAL |