Part Number
Part Number:
NSN:
NIIN:
Item Name:
DELAY LINE
Definition:
AN ITEM WHICH PROVIDES A PREDETERMINED DELAY TO AN ELECTRICAL PULSE, WHILE MAINTAINING SUBSTANTIALLY THE SAME WAVEFORM. THE DELAY IS OBTAINED BY MEANS OF A REAL OR ARTIFICIAL TRANSMISSION LINE OR EQUIVALENT DEVICE. THE EQUIVALENT DEVICE MAY BE ACOUSTIC, DISTRIBUTIVE, LUMPED CONSTANT, MAGNETIC SOLID STATE, OR SURFACE ACOUSTICAL WAVE TYPE. SEE ALSO ATTENUATOR, (AS MODIFIED); TRANSFORMER, (AS MODIFIED); AND OSCILLATOR, PULSE DELAY.
CAGE Information
| Code | Company |
|---|---|
| 28527 | ITT CORPORATION |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| AFGA | OPERATING TEMP RANGE | -55.0/+125.0 DEG CELSIUS |
| APQL | FREQUENCY BANDWIDTH | NOT RATED |
| ADAQ | BODY LENGTH | 2.250 INCHES NOMINAL |
| CCDN | DELAY TIME VARIATION METHOD | VARIABLE |
| AAZT | SLOT DEPTH | ANY ACCEPTABLE |
| CCDX | PULSE RISE TIME RATING | 4.1 NANOSECONDS |
| ARBR | BODY DEPTH | 0.350 INCHES NOMINAL |
| ADAT | BODY WIDTH | 0.750 INCHES NOMINAL |
| BZWM | SIGNAL DELAY METHOD | INDUCTANCE |
| CCFF | TERMINAL TYPE AND QUANTITY | 4 WIRE LEADS |
| ABWV | SHAFT DIAMETER | ANY ACCEPTABLE |
| AZGM | MOUNTING FACILITY | TERMINAL |
| ACZB | FREQUENCY RATING | NOT RATED |
| AAQL | BODY STYLE | RECTANGULAR |
| ANNQ | MATERIAL AND LOCATION | PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE MDG OVERALL |
| ABXF | SHAFT LENGTH | 0.120 INCHES MAXIMUM |
| ANSR | OUTPUT IMPEDANCE RATING | 500.000 OHMS |
| AFBH | INDIVIDUAL SECTION QUANTITY | 1 |
| AMSE | VOLTAGE RATING | NOT RATED |
| CCDT | DELAY TIME VARIATION PER DEG CELSIUS | NOT RATED |
| ANSL | INPUT IMPEDANCE RATING | 500.000 OHMS |
| BHTH | ATTENUATION IN DECIBELS | 0.500 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| CCDQ | SECTION DELAY TIME | 125.000 NANOSECONDS 1ST PRIMARY NANOAMPERES |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | FOUR POSITION RECTANGULAR |
| AFDS | LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 1.800 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AFDV | LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 0.300 INCHES NOMINAL |
| ABGC | SLOT WIDTH | ANY ACCEPTABLE |