Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
STUDS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES NUT THD |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| AASA | THREAD LENGTH | 0.444 INCHES MINIMUM NUT THREAD |
| CMLP | THREAD QUANTITY PER INCH | 18 STUD THREAD |
| MATT | MATERIAL | STEEL COMP E4340 |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES NUT THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| AASA | THREAD LENGTH | 0.844 INCHES MINIMUM STUD THREAD AND 0.955 INCHES MAXIMUM STUD THREAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHANK |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 24 NUT THREAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES STUD THD |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| ABHP | OVERALL LENGTH | 1.700 INCHES NOMINAL |