Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
STUDS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES NUT THD |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| MATT | MATERIAL | STEEL COMP E4340 |
| AASA | THREAD LENGTH | 0.938 INCHES MINIMUM STUD THREAD AND 1.063 INCHES MAXIMUM STUD THREAD |
| ABHP | OVERALL LENGTH | 2.196 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| CMLP | THREAD QUANTITY PER INCH | 16 STUD THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHANK |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 24 NUT THREAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES STUD THD |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |
| AASA | THREAD LENGTH | 0.688 INCHES MINIMUM NUT THREAD AND 0.771 INCHES MAXIMUM NUT THREAD |