Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 97499 | BELL HELICOPTER TEXTRON INC. |
Federal Supply Class
Title
STUDS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AASA | THREAD LENGTH | 0.688 INCHES NOMINAL NUT THREAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES NUT THD |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES NUT THREAD |
| CQFM | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| ABHP | OVERALL LENGTH | 2.196 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| CMLP | THREAD QUANTITY PER INCH | 16 STUD THREAD |
| AAJE | THREAD PITCH DIAMETERS | +0.3512/+0.3527 INCHES STUD THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNF NUT THREAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES SHANK |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,C4 MIL SPEC ALL MATERIAL RESPONSES |
| THSD | THREAD SERIES DESIGNATOR | UNS STUD THREAD |
| CMLP | THREAD QUANTITY PER INCH | 24 NUT THREAD |
| MATT | MATERIAL | STEEL COMP 4340 OR STEEL COMP E4340 |
| AASA | THREAD LENGTH | 0.938 INCHES NOMINAL STUD THREAD |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES STUD THD |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES STUD THREAD |