Part Number
Definition:
A CYLINDER CONTAINING A PISTON AND OTHER COMPONENT PARTS DESIGNED TO DEVELOP LINEAR MOTION REQUIRED TO OPERATE A GIVEN OBJECT(S) WITH ENERGY GENERATED FROM EITHER PNEUMATIC OR HYDRAULIC PRESSURE(S). SEE ALSO CYLINDER, ACTUATING, LINEAR. DO NOT USE IF A MORE SPECIFIC NAME APPLIES.
CAGE Information
| Code | Company |
|---|---|
| 19156 | MOOG INC. |
Federal Supply Class
Title
AIRCRAFT HYDRAULIC, VACUUM, AND
Inclusions:
INCLUDES HYDRAULIC AND PNEUMATIC ACCUMULATORS, PUMPS, MOTORS, ACTUATING CYLINDERS, AND FILTERS; DE-ICING BOOTS; FLUID TYPE DE-ICING PUMPS, VALVES AND FILTERS; VACUUM SYSTEM OIL SEPARATORS; PNEUMATIC PRESSURIZATION EQUIPMENT OTHER THAN THAT FOR PRESSURIZING CABINS AND COMPARTMENTS.
Exclusions:
EXCLUDES JET ENGINE HYDRAULIC COMPONENTS (FSC 2840); VALVES SPECIFICALLY DESIGNED FOR AIR CONDITIONING, HEATING, VENTILATING, CABIN PRESSURIZING, AND THERMAL DE-ICING (FSC 1660); VALVES SPECIFICALLY DESIGNED FOR USE WITH AIRCRAFT ENGINES (FSC 2840); GUIDED MISSILES AND GUIDED MISSILE ENGINES (FSC 1338), LANDING GEAR (FSC 1620), WHEEL AND BRAKE SYSTEM COMPONENTS (FSC 1630); OXYGEN BREATHING SYSTEM COMPONENTS (FSC 1660); IN-FLIGHT REFUELING SYSTEM HYDRAULIC COMPONENTS (FSC 1680); SPECIFICALLY DESIGNED HYDRAULIC POWER STEERING SYSTEM COMPONENTS (FSC 1620).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHB | FIRST END OUTSIDE DIAMETER | 2.500 INCHES NOMINAL |
| CLLZ | SECOND PISTON ROD END LUBRICATION FACILITY (NON-CORE) | NOT INCLUDED |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT |
| ABJH | TEMP RATING | 275.0 DEG FAHRENHEIT |
| AMDX | FIRST END HOLE DIAMETER | 0.999 INCHES NOMINAL |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| AJFY | SEAT ANGLE IN DEG | 60.0 |
| CLMT | PORT STYLE | GASKET SEAL |
| BGST | PRESSURE RATING | 3000.0 POUNDS PER SQUARE INCH NOMINAL |
| CKSF | FIRST PISTON ROD END STYLE | BEARING TYPE |
| AMPC | FIRST END THICKNESS AT MOUNTING HOLES | 0.955 INCHES NOMINAL |
| AKRE | VOLTAGE RATING IN VOLTS | 26.0 DC |
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| CLMX | PORT THREAD DIAMETER | 0.750 INCHES NOMINAL |
| CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| AMQZ | COMPRESSED LENGTH | 32.656 INCHES NOMINAL |
| ADAV | OVERALL DIAMETER | 4.200 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 16 |
| CKRM | INTEGRAL VALVE OPERATION METHOD | ELECTRIC |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 37.625 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 4.165 INCHES NOMINAL |
| CLNB | PORT THREAD CLASS | 3B |
| CLML | MOUNTING TYPE AND LOCATION | TONGUE CYLINDER HEAD END |
| CLLN | FIRST PISTON ROD END LUBRICATION FACILITY (NON-CORE) | INCLUDED |
| ADAR | BODY OUTSIDE DIAMETER | 4.200 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 42.593 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.999 INCHES NOMINAL |
| AAFZ | BODY MATERIAL | STEEL, STAINLESS |
| CLMS | PORT LOCATION AND QUANTITY | 4 CENTER SECTION |