Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , LOCK
Definition:
A WASHER WHICH IS USUALLY ROUND WITH A CENTRALLY LOCATED HOLE. ITS EDGES AND TWO BEARING SURFACES ARE SO DESIGNED THAT APPLIED PRESSURE BRINGS INTO PLAY THE SPRING TENSION AND/OR FRICTIONAL LOCKING PRINCIPLE WHICH MATERIALLY RESISTS ANY TENDENCY TOWARD TURNING. IT MAY BE MADE OF ONE OR TWO PIECES
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-17091,TY 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-17091,TY 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ABPX | MATERIAL THICKNESS | 0.052 INCHES MINIMUM AND 0.062 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 45.0 DEGREES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| MATT | MATERIAL | PLASTIC POLYAMIDE OVERALL |
| STYL | STYLE DESIGNATOR | COUNTERSINK INTERNAL TEETH |
| AAUB | HOLE DIAMETER | 0.637 INCHES NOMINAL |