Part Number
Definition:
A GENERATOR PRIMARILY DESIGNED TO BE MOUNTED ON AN INTERNAL COMBUSTION ENGINE, AND TO BE DRIVEN BY THE ENGINE TO KEEP THE BATTERY IN A CHARGED CONDITION. MAY ALSO SUPPLY CURRENT FOR THE ENGINE IGNITION SYSTEM AND/OR ELECTRICAL EQUIPMENT WHICH IS CONNECTED TO THE BATTERY CIRCUIT. INCLUDES ALTERNATING CURRENT GENERATORS DESIGNED FOR USE WITH A RECTIFIER. EXCLUDES THE MAJOR GENERATOR OF "GENERATING SETS". FOR GENERATORS SPECIFICALLY DESIGNED FOR AIRCRAFT USE AND NOT MOUNTED ON THE ENGINE, SEE GENERATOR, DIRECT CURRENT.
CAGE Information
| Code | Company |
|---|---|
| 31007 | NAVISTAR INTL CORP |
Federal Supply Class
Title
ENGINE ELECTRICAL SYSTEM COMPONE
Inclusions:
INCLUDES GENERATORS; MAGNETOS; SPARK PLUGS; IGNITION COILS; IGNITION DISTRIBUTORS; ENGINE VOLTAGE REGULATORS; IGNITION HARNESS ASSEMBLIES; STARTING MOTORS FOR ENGINES.
Exclusions:
EXCLUDES VEHICULAR LIGHTING FIXTURES (FSC 6220) AND AIRCRAFT GENERATORS (FSC 2925).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BZRR | THREAD SERIES | UNF |
| BCMF | DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 5.105 INCHES NOMINAL |
| BCLY | DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.830 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AASA | THREAD LENGTH | 0.814 INCHES NOMINAL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABVA | UNTHREADED PORTION LENGTH | 1.320 INCHES NOMINAL |
| ADZC | ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| BCGS | SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| BCGM | RECTIFIER LOCATION | INTEGRAL |
| ABPT | SECOND STEP DIAMETER | 0.873 INCHES MINIMUM AND 0.874 INCHES MAXIMUM |
| AWDP | THREAD DIAMETER | 0.625 INCHES NOMINAL |
| ABRR | KEYWAY WIDTH | 0.156 INCHES NOMINAL |
| CFHL | THREAD CLASS | 2A |
| ELEC | VOLTAGE IN VOLTS | 12.0 |
| AKCT | SHAFT ROTATION DIRECTION | CLOCKWISE OR COUNTERCLOCKWISE |
| ADER | MOUNTING STYLE | BRACKET MTD W/TWO MTG HOLES |
| BCGF | MAXIMUM OUTPUT CURRENT RATING IN AMPS | 62.0 |
| BCMH | BOTTOM MOUNTING HOLE DIAMETER | 0.451 INCHES NOMINAL |
| BCMD | DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 3.965 INCHES NOMINAL |
| BCMB | ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 180.0 |
| AFYS | KEYWAY LENGTH | 0.750 INCHES NOMINAL |