Part Number
Definition:
AN ITEM FABRICATED FROM NONMETALLIC MATERIAL DESIGNED TO BE USED WHERE THERE IS NO RELATIVE MOTION BETWEEN JOINED PARTS. ITEMS HAVING A SQUARE OR RECTANGULAR CROSS SECTION MUST BE A SINGLE PIECE WHOSE ENDS MAY HAVE BEEN SECURED TOGETHER TO FORM A SPECIFIC SHAPE. IT MAY BE FORMED TO A SPECIFIC SHAPE, EXCEPT ROUND, WITH OR WITHOUT JOINTS. IT MAY HAVE FABRIC, CORD OR METAL REINFORCEMENT. EXCEPT FOR MOLDED CORNERS, END CUTS, AND MOUNTING FACILITIES SUCH AS HOLES, SLOTS, PRESS-FIT BUTTONS, OR THE LIKE, THE ITEM MUST BE OF ONE CONTINUOUS CROSS SECTION. FOR STRAIGHT ITEMS WITH SQUARE END CUTS AND WITHOUT MOUNTING HOLES, SLOTS OR PRESS-FIT BUTTONS SEE RUBBER STRIP. FOR ITEMS WITH ROUND CROSS SECTIONS SEE SEAL, NONMETALLIC ROUND SECTION. EXCLUDES GASKET AND PACKING, PREFORMED.
CAGE Information
| Code | Company |
|---|---|
| 59875 | EATON INDUSTRIAL CORPORATION DBA ARG |
Federal Supply Class
Title
PACKING AND GASKET MATERIALS
Inclusions:
INCLUDES GENERAL PURPOSE OIL GREASE, AIR, LIQUID, GAS, AND CHEMICAL SEALS; OAKUM; PREFABRICATED GASKETS AND SEALS DESIGNED FOR A SINGLE SPECIFIC APPLICATION.
Exclusions:
EXCLUDES O-RINGS (FSC 5331); BULK MATERIAL ITEMS, SUCH AS; RUBBER, CORK, AND ASBESTOS SHEETS AND STRIPS (FSG 93); LIQUID GASKET MATERIALS (RTV, PERMATEX, ETC.) (FSG 80); RFI AND EMI SEALS AND GASKETS (FSC 5999), AND ALL SEAL RETAINERS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-5315 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| AARN | FABRICATION METHOD | SOLID |
| STYL | STYLE DESIGNATOR | STRIP |
| CTTK | END CUT ANGLE | 50.0 DEGREES |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL |
| ABHP | OVERALL LENGTH | 0.530 INCHES MINIMUM AND 0.560 INCHES MAXIMUM |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| ADWH | CROSS-SECTIONAL WIDTH | 0.090 INCHES MINIMUM AND 0.100 INCHES MAXIMUM |
| ADVN | CROSS-SECTIONAL HEIGHT | 0.175 INCHES MINIMUM AND 0.205 INCHES MAXIMUM |
| CQCF | CONSTRUCTION | SOLID |
| ADUK | END CUT LENGTH | 0.180 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |