Part Number
Part Number:
NSN:
NIIN:
Item Name:
STUD , PLAIN
Definition:
A HEADLESS FASTENER NOT EXCEEDING 12 INCHES (304.8 MM) IN LENGTH, THREADED EXTERNALLY ON BOTH ENDS WITH THREADS OF THE SAME NOMINAL DIAMETER. THE MAXIMUM DIAMETER OF THE UNTHREADED PORTION MUST NOT BE GREATER THAN THE NOMINAL THREAD DIAMETER PLUS 0.020 INCHES (0.508 MM). THE UNTHREADED PORTION MUST BE WITHOUT LOCKING OR WRENCHING PROVISIONS. IT MAY BE THREAD RELIEVED. SEE ALSO ROD, THREADED END AND ROD, CONTINUOUS THREAD.
CAGE Information
| Code | Company |
|---|---|
| 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR |
Federal Supply Class
Title
STUDS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | TAPERED THREAD FROM 0.563 IN. MIN,0.566 IN. MAX PITCH DIA AT STUD END TO 0.572 IN. MIN,0.575 IN. MAX PITCH DIA AT SHOULDER |
| FEAT | SPECIAL FEATURES | TAPERED THREAD FROM 0.563 IN. MIN,0.566 IN. MAX PITCH DIA AT STUD END TO 0.572 IN. MIN,0.575 IN. MAX PITCH DIA AT SHOULDER |
| CMLP | THREAD QUANTITY PER INCH | 11 STUD THREAD |
| MATT | MATERIAL | STEEL COMP 1040 |
| AAJE | THREAD PITCH DIAMETERS | +0.5630/+0.5660 INCHES STUD THREAD |
| AAJD | THREAD CLASS | 3A NUT THREAD |
| CMLP | THREAD QUANTITY PER INCH | 11 NUT THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND NUT THREAD |
| ABHP | OVERALL LENGTH | 2.750 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.875 INCHES MAXIMUM STUD THREAD |
| SFTT | SURFACE TREATMENT | CHROMIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNC STUD THREAD |
| AAJF | THREAD DIRECTION | RIGHT-HAND STUD THREAD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633 FED SPEC SINGLE MATERIAL RESPONSE |
| CQFM | HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 30.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES NUT THREAD |
| AASA | THREAD LENGTH | 1.625 INCHES MAXIMUM NUT THREAD |
| THSD | THREAD SERIES DESIGNATOR | UNC NUT THREAD |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES STUD THREAD |