Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMFZ | SECOND END DIAMETER | 0.5625 INCHES NOMINAL |
| AMFT | SECOND END KEYWAY DEPTH | 0.0728 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-746,COMP A FED SPEC SINGLE MATERIAL RESPONSE |
| CSPY | LARGEST STEP DIAMETER | 0.875 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 8 |
| MATT | MATERIAL | COPPER ALLOY |
| AMFR | SECOND END KEYWAY WIDTH | 0.1250 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.1250 INCHES NOMINAL |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.4500 INCHES NOMINAL |
| AMDG | FIRST END KEYWAY DEPTH | 0.0800 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNALLY THREADED AND FLAT KEYWAY |
| AMFS | SECOND END EXTERNAL KEYWAY LENGTH | 1.5200 INCHES NOMINAL |
| AMDL | FIRST END DIAMETER | 0.5860 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 35.670 INCHES NOMINAL |
| AMHY | SECOND END ANGLE BETWEEN KEYWAYS | 180.0 DEGREES NOMINAL |
| AAHP | SECOND END STYLE | TWO FLAT KEYWAYS |
| AMDE | FIRST END EXTERNAL KEYWAY LENGTH | 0.4500 INCHES NOMINAL |