Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAHP | SECOND END STYLE | CIRCULAR GROOVED |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMDL | FIRST END DIAMETER | 0.2500 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | PLAIN |
| AAHW | SECOND END GROOVE WIDTH | 0.0290 INCHES MINIMUM AND 0.0310 INCHES MAXIMUM |
| AMFZ | SECOND END DIAMETER | 0.2500 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,CLASS 2,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE |
| AAHX | SECOND END GROOVE DIAMETER | 0.2090 INCHES MINIMUM AND 0.2120 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 3.500 INCHES NOMINAL |
| AMFQ | SECOND END DISTANCE FROM END TO GROOVE | 0.437 INCHES NOMINAL |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| CSYM | SURFACE FINISH | 10.0 MICROINCHES |