Part Number
Definition:
A NUT, FLAT ON TOP AND BOTTOM HAVING 6 FLAT SIDES. FOR ITEMS WHICH HAVE INTERNAL TAPERED OR STRAIGHT (PARALLEL) PIPE THREADS, SPECIFIC ELECTRICAL CONDUIT SIZE DESIGNATION, AND WHICH WHEN INSTALLED, PROVIDE A METHOD OF TIGHTENING TO LOCK THE CONNECTION, SEE LOCKNUT, ELECTRICAL CONDUIT. SEE ALSO LOCKNUT, TUBE FITTING. FOR ITEMS HAVING A THICKNESS (OR HEIGHT) EXCEEDING TWO TIMES THE WIDTH ACROSS THE FLATS, USE POST, ELECTRICAL-MECHANICAL EQUIPMENT. (WHEN HEIGHT OR THICKNESS AND/OR WIDTH ACROSS THE FLATS IS DESIGNATED AS A TOLERANCE DIMENSION, THE MAXIMUM DIMENSION WILL BE USED TO DETERMINE COMPLIANCE.)
CAGE Information
| Code | Company |
|---|---|
| 00088 | ROYAL OAK GAGE INC |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADFK | NUT COUNTERBORE DEPTH | 0.049 INCHES MINIMUM NUT AND 0.059 INCHES MAXIMUM NUT |
| ADFK | NUT COUNTERBORE DEPTH | 0.049 INCHES MINIMUM NUT AND 0.059 INCHES MAXIMUM NUT |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES |
| AGGP | DRILLED HOLE DIAMETER | 0.065 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4120 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CQFM | HARDNESS RATING | NOT RATED |
| ASDB | WIDTH ACROSS FLATS | 1.364 INCHES MINIMUM AND 1.377 INCHES MAXIMUM |
| CRSQ | COUNTERSINK ANGLE | 85.0 DEGREES MINIMUM NUT AND 95.0 DEGREES MAXIMUM NUT |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAJD | THREAD CLASS | 3B |
| AZKQ | TEMP RATING | NOT RATED |
| ACTA | NUT STYLE | HEXAGON |
| BZRR | THREAD SERIES | UN |
| ADEA | NUT HEIGHT | 0.422 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| CRTM | BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| CMLP | THREAD QUANTITY PER INCH | 12 |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |