Part Number
Part Number:
NSN:
NIIN:
Item Name:
GEAR , BEVEL
Definition:
A GEAR IN THE FORM OF A FRUSTUM OF A CONE, WITH STRAIGHT, SKEWED, OR CURVED TEETH, CUT ON THE EXTERNAL FACE. SEE ALSO GEAR, ANTIBACKLASH, BEVEL.
CAGE Information
| Code | Company |
|---|---|
| 24617 | GENERAL MOTORS CORP |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ABSA | SPLINE QUANTITY | 6 BOTH ENDS |
| AGJS | PITCH DIAMETER | 2.8570 INCHES NOMINAL |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| AAQL | BODY STYLE | PLAIN, SOLID |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.073 INCHES SECOND END |
| CWMW | TEETH TYPE | STRAIGHT |
| MATT | MATERIAL | STEEL COMP 4140 OVERALL AND STEEL COMP 8640 OVERALL AND STEEL COMP 8740 OVERALL |
| CWZN | BOLT HOLE CIRCLE NOMINAL DIAMETER | 2.921 INCHES TRANSVERSELY THROUGH FLANGE |
| CWFR | NOMINAL OVERALL LENGTH | 0.808 INCHES |
| CWQD | PITCH ANGLE | 63.4333 DEGREES |
| CWTX | HUB NOMINAL DIAMETER | 0.875 INCHES FIRST END |
| AJLA | TEETH QUANTITY | 40 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.0810 INCHES FIRST END |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| STYL | STYLE DESIGNATOR | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM HUB AND 36.0 ROCKWELL C MAXIMUM HUB |
| CWRM | FACE NOMINAL WIDTH | 0.562 INCHES |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624,FS 8640,FS 8740,FS 4140 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |