Part Number
Definition:
A DEFORMABLE MATERIAL WHICH PREVENTS THE PASSAGE OF MATTER THROUGH THE JOINT FORMED WHEN TWO FACES ARE JOINED. IT MAY BE METALLIC OR NONMETALLIC, LUBRICATED OR IMPREGNATED, SOLID OR HOLLOW CROSS SECTION. IT MAY BE MADE TO ANY PREDETERMINED DIMENSION AND SHAPE. EXCLUDES FLAT DISKS, ITEMS MADE OF FELT MATERIAL AND ITEMS HAVING JOINTS. FOR ROUND METAL AND PLASTIC ITEMS WITH AN APERTURE AND A SOLID RECTANGULAR CROSS SECTION, SEE WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; AND SPACER RING. EXCLUDES DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET, ELECTRONIC; AND RING, SEALING JAR.
CAGE Information
| Code | Company |
|---|---|
| 23862 | MILITARY VEHICLES OPN GENERAL MOTORS |
Federal Supply Class
Title
PACKING AND GASKET MATERIALS
Inclusions:
INCLUDES GENERAL PURPOSE OIL GREASE, AIR, LIQUID, GAS, AND CHEMICAL SEALS; OAKUM; PREFABRICATED GASKETS AND SEALS DESIGNED FOR A SINGLE SPECIFIC APPLICATION.
Exclusions:
EXCLUDES O-RINGS (FSC 5331); BULK MATERIAL ITEMS, SUCH AS; RUBBER, CORK, AND ASBESTOS SHEETS AND STRIPS (FSG 93); LIQUID GASKET MATERIALS (RTV, PERMATEX, ETC.) (FSG 80); RFI AND EMI SEALS AND GASKETS (FSC 5999), AND ALL SEAL RETAINERS.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
| STYL | STYLE DESIGNATOR | NON-CIRCULAR |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TY MMI-5 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 1.750 INCHES NOMINAL |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 2.500 INCHES NOMINAL |
| AECS | BOLT HOLE QUANTITY | 6 |
| ABHP | OVERALL LENGTH | 6.250 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 5.000 INCHES NOMINAL |
| ADPW | OUTSIDE CORNER RADIUS | 1.250 INCHES NOMINAL |
| ADUE | APERTURE WIDTH | 3.250 INCHES NOMINAL |
| MATT | MATERIAL | PLASTIC MELAMINE OVERALL AND GLASS OVERALL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.020 INCHES NOMINAL |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| ADUF | APERTURE LENGTH | 4.500 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.416 INCHES MAXIMUM |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL |
| ADPQ | INSIDE CORNER RADIUS | 0.375 INCHES NOMINAL |