Part Number
Part Number:
NSN:
NIIN:
Item Name:
BRACKET , DOUBLE ANGLE
Definition:
A RIGID ITEM USUALLY FABRICATED FROM FLAT MATERIAL, FORMING TWO ALTERNATE OR TWO ADJACENT INTERIOR ANGLES, BOTH WHICH ARE LESS THAN 180 DEGREES (3.141 RADIANS). IT IS DESIGNED TO POSITION, ALIGN, AND/OR SUPPORT AN ITEM. IT MAY BE REINFORCED. SEE ALSO BRACKET, ANGLE AND BRACKET (1), MOUNTING.
CAGE Information
| Code | Company |
|---|---|
| 99971 | LOCKHEED MARTIN CORP NAVAL ELECTRONI |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| ADLK | FIRST LEG LENGTH | 0.440 INCHES NOMINAL |
| AHLF | SECOND LEG WIDTH | 0.550 INCHES NOMINAL |
| AHRB | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.140 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | PACER DAWN |
| SFTT | SURFACE TREATMENT | PASSIVATE |
| ADLL | SECOND LEG LENGTH | 0.625 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, CL304, COND A FED SPEC SINGLE MATERIAL RESPONSE |
| AHQN | FIRST LEG WIDTH | 0.300 INCHES NOMINAL |
| AKCU | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AHPZ | CENTER SECTION HEIGHT | 0.750 INCHES NOMINAL |
| AHPX | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 |
| AKAU | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| AHLK | FIRST LEG HOLE DIAMETER | 0.138 INCHES NOMINAL |
| AKBU | SECOND LEG STYLE | SQUARE |
| STYL | STYLE DESIGNATOR | DOUBLE ANGLE |
| AHQQ | FIRST LEG END WIDTH | 0.120 INCHES NOMINAL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171 MIL STD SINGLE TREATMENT RESPONSE |
| AHQB | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL |
| AHLW | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| AHPW | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| AJZU | FIRST LEG STYLE | SQUARE AND TAPERED |
| AHLN | SECOND LEG HOLE DIAMETER | 0.177 INCHES NOMINAL |
| AHRA | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.150 INCHES NOMINAL |
| AHLV | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.380 INCHES NOMINAL |
| AHQA | CENTER SECTION WIDTH | 0.550 INCHES NOMINAL |