Part Number
Part Number:
NSN:
NIIN:
Item Name:
WASHER , SHOULDERED AND RECESSED
Definition:
A WASHER, ROUND IN SHAPE, HAVING A CENTRALLY LOCATED HOLE. ONE BEARING SURFACE IS FLAT, THE OTHER SURFACE IS IN THE FORM OF A RAISED SHOULDER (BOSS) HAVING A FLAT BEARING SURFACE. EITHER OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILAR SHAPED RECESS. THE THICKNESS OF THE SHOULDER (BOSS) MUST NOT EXCEED 25 PERCENT OF THE SHOULDER (BOSS) DIAMETER. FOR ITEMS HAVING A SHOULDER (BOSS) OF GREATER THICKNESS, USE BEARING, SLEEVE; BUSHING, SLEEVE; OR SPACER, SLEEVE. EXCLUDES INSULATOR, WASHER AND THRUST TYPE WASHERS.
CAGE Information
| Code | Company |
|---|---|
| 0AHP5 | CURTISS-WRIGHT CONTROLS INC DIV FLIG |
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CSYM | SURFACE FINISH | 32.0 MICROINCHES TOP |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES TOP |
| AAVH | SHOULDER DIAMETER | 3.515 INCHES MINIMUM AND 3.525 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES INNER |
| ABKV | OUTSIDE DIAMETER | 3.868 INCHES MINIMUM AND 3.873 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BOTTOM |
| CSTM | RECESS ANGLE | 45.0 DEGREES NOMINAL |
| AAUB | HOLE DIAMETER | 3.150 INCHES MINIMUM AND 3.152 INCHES MAXIMUM |
| ABMG | SHOULDER HEIGHT | 0.201 INCHES MINIMUM AND 0.202 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| STYL | STYLE DESIGNATOR | SHOULDERED AND RECESSED |
| CQFM | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| CSYM | SURFACE FINISH | 8.0 MICROINCHES SHOULDER FACE |
| ABPX | MATERIAL THICKNESS | 0.228 INCHES MINIMUM AND 0.231 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |