Part Number
Definition:
AN EXTERNALLY THREADED FASTENER WHOSE UNTHREADED PORTION IS OF A SPECIFIED GRIP LENGTH, PLATED OR UNPLATED, AND IS MACHINED TO A TOLERANCE OF ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) OR LESS OF A SPECIFIC DIAMETER FOR ITEMS ONE INCH (25 MM) OR LESS IN DIAMETER. ITEMS OVER ONE INCH (25 MM) IN DIAMETER SHALL HAVE A TOLERANCE OF FIFTEEN TEN-THOUSANDTHS (0.0015) OF AN INCH (0.038 MM) OR LESS. THE NOMINAL MAJOR DIAMETER OF THE THREADS SHALL BE AT LEAST ONE THOUSANDTH (0.001) OF AN INCH (0.025 MM) BELOW THE MINIMUM SHANK DIAMETER, BUT NOT BELOW THE MINIMUM MAJOR DIAMETER FOR APPLICABLE CLASS OF FIT, AS SHOWN IN THE SCREW THREAD STANDARDS, FED STD H28 AND/OR OTHER NATIONALLY RECOGNIZED STANDARDS. THE HEAD IS NOT DESIGNED TO BE HELD OR DRIVEN WITH AN INSERTED DRIVER, NOR IS IT DESIGNED FOR ROTATION BY THE THUMB AND FINGERS. A LOCKING FEATURE MAY BE INCORPORATED IN THE DESIGN OF THE HEAD OR THREADS. FOR ITEMS HAVING CLOSE TOLERANCE, AND FABRICATED FROM MATERIAL HAVING 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH, SEE BOLT, SHEAR. FOR ITEMS FABRICATED FROM MATERIAL HAVING LESS THAN 160,000 POUNDS PER SQUARE INCH (1100 MEGAPASCALS) MINIMUM TENSILE STRENGTH AND NOT HAVING A CLOSE TOLERANCE, SEE BOLT, MACHINE.
CAGE Information
| Code | Company |
|---|---|
| 82918 | THE BOEING COMPANY GLOBAL SERVICES & |
Federal Supply Class
Title
BOLTS
Inclusions:
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| AAJD | THREAD CLASS | 3A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 5137 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| CQBC | MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES MINIMUM FIRST HOLE AND 0.150 INCHES MAXIMUM FIRST HOLE |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASU | HEAD HEIGHT | 0.281 INCHES MINIMUM AND 0.296 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 2.185 INCHES MINIMUM AND 3.115 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ANEE | GRIP LENGTH | 2.006 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.755 INCHES MINIMUM AND 1.055 INCHES MAXIMUM |
| AASK | HEAD STYLE | HEXAGON |
| AHYM | NOMINAL THREAD DIAMETER | 0.562 INCHES |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.597 INCHES MINIMUM FIRST HOLE AND 2.897 INCHES MAXIMUM FIRST HOLE |
| AATB | WIDTH BETWEEN FLATS | 0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM |