Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY) OF THE OUTPUT IS EQUAL TO OR LESS THAN PLUS OR MUNUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE, FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION.
CAGE Information
| Code | Company |
|---|---|
| 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL D |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 172.5 2ND SECTION |
| ADAV | OVERALL DIAMETER | 1.707 INCHES MAXIMUM |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 3RD SECTION |
| TEST | TEST DATA DOCUMENT | 10001-2303002 DRAWING |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 4TH SECTION |
| PRMT | PRECIOUS MATERIAL | SILVER |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| ABXF | SHAFT LENGTH | 0.687 INCHES NOMINAL |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 1ST SECTION |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFK | MAXIMUM STARTING TORQUE | 2.80 INCH-OUNCES |
| AAVM | PILOT LENGTH | 0.0730 INCHES MINIMUM |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 9.75 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 550.0 OHMS C AND BETTER SELECT |
| AAPN | SECTION QUANTITY | 4 |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 2ND SECTION |
| AAVL | PILOT DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 40.0 ALL SECTIONS |
| ABHP | OVERALL LENGTH | 3.336 INCHES MAXIMUM |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 125.0 ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 1ST SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 9.75 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | 0.2494 INCHES MINIMUM AND 0.2497 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.15/+0.15 2ND SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 1.1 PERCENT, RATED AMPERES C AND BETTER V.G. STEPPING |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 1ST SECTION |
| ABPA | UNDERCUT DIAMETER | 1.3115 INCHES MINIMUM AND 1.3120 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.453 INCHES NOMINAL |
| AEFL | MAXIMUM RUNNING TORQUE | 2.00 INCH-OUNCES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 2ND SECTION |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 3RD SECTION |
| ADAQ | BODY LENGTH | 2.617 INCHES MAXIMUM |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 4TH SECTION |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | CLAMP RING |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 354.0 NOMINAL |
| TTQY | TERMINAL TYPE AND QUANTITY | 14 TURRET |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.5/+0.5 DEG ANGULAR ROTATION 1ST SECTION |
| AECZ | MOUNTING LIP DIAMETER | 1.4380 INCHES NOMINAL |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -0.5/+0.5 DEG ANGULAR ROTATION 2ND SECTION |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 172.5 1ST SECTION |