Part Number
Definition:
A RESISTOR IN WHICH A SLIDING OR ROLLING CONTACT MOVES OVER AN EXPOSED AREA OF THE RESISTIVE ELEMENT TO CHANGE THE OHMIC VALUE OF THE OUTPUT. THE FUNCTIONAL TOLERANCE (LINEARITY), IF GIVEN, OF THE OUTPUT IS GREATER THAN PLUS OF MINUS 1 PERCENT ON LINEAR OUTPUTS. SPECIFIED OUTPUTS SUCH AS SINE, COSINE, TANGENT, ETC., SHALL BE CONSIDERED TO BE PRECISION. FOR ITEMS HAVING MANUALLY POSITIONED TAPS DESIGNED TO BE SET AND FIXED PRIOR TO USE, SEE RESISTOR, ADJUSTABLE. FOR ITEMS WITH STEP BY STEP VARIATION, SEE RHEOSTAT AND RESISTOR, STEP BY STEP. FOR TANDEM-MOUNTED ITEMS DESIGNED TO FUNCTION TOGETHER AS AN ATTENUATOR (AND RATED ACCORDINGLY), SEE ATTENUATOR, VARIABLE. EXCLUDES RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; AND RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.
CAGE Information
| Code | Company |
|---|---|
| 28527 | ITT CORPORATION |
Federal Supply Class
Title
RESISTORS
Inclusions:
INCLUDES VARISTORS; RESISTIVE BALLAST TUBES; RHEOSTATS; RESISTOR NETWORKS; RESISTOR MOUNTING HARDWARE; THERMISTORS.
Exclusions:
EXCLUDES RESISTANCE WIRE.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| ABPM | BODY DIAMETER | 1.172 INCHES MAXIMUM |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFN | NONTURN DEVICE LOCATION | AT 9 OCLOCK |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -2.0/+2.0 SINGLE SECTION |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | 0.220 INCHES MINIMUM AND 0.280 INCHES MAXIMUM |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 TAB, SOLDER LUG |
| AAQL | BODY STYLE | CYLINDRICAL BUSHING MOUNTED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDX | SHAFT STYLE | ROUND, SLOTTED |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CSDL | STANDARD TAPER CURVE PER SECTION | A SINGLE SECTION |
| AEFP | NONTURN DEVICE RADIUS | 0.563 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.453 INCHES MINIMUM AND 0.547 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.672 INCHES MAXIMUM |
| ADAP | MOUNTING BUSHING LENGTH | 0.328 INCHES MINIMUM AND 0.422 INCHES MAXIMUM |
| AJYN | SCREW THREAD DIAMETER | 0.375 INCHES NOMINAL |