Part Number
Part Number:
NSN:
NIIN:
Item Name:
SHAFT , AXLE , AUTOMOTIVE
Definition:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
CAGE Information
| Code | Company |
|---|---|
| 23862 | MILITARY VEHICLES OPN GENERAL MOTORS |
Federal Supply Class
Title
VEHICULAR POWER TRANSMISSION COM
Inclusions:
INCLUDES TRANSFER TRANSMISSION ASSEMBLIES; CLUTCH ASSEMBLIES; UNIVERSAL JOINTS; PROPELLER SHAFTS; AUTOMOTIVE TORQUE CONVERTERS; POWER TAKEOFFS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AETC | METALLIC HARDNESS RATING | NOT RATED |
| AMGA | SECOND END SPLINE LENGTH | 3.625 INCHES NOMINAL |
| MATL | MATERIAL | STEEL |
| FEAT | SPECIAL FEATURES | SHAFT 2.125 IN. OD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE |
| BNYW | FLANGE HOLE TAPER | 0.453 INCHES PER SQUARE INCH BLANK |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 2.250 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 2.125 INCHES NOMINAL |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.453 INCHES NOMINAL |
| AMQF | SECOND END TYPE | SPLINED |
| BNYS | FLANGE OVERALL THICKNESS | 1.750 INCHES NOMINAL |
| AAUB | HOLE DIAMETER | 0.937 INCHES NOMINAL |
| AMQA | FIRST END TYPE | FLANGED |
| AHTC | FLANGE OUTSIDE DIAMETER | 8.375 INCHES NOMINAL |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| ABHP | OVERALL LENGTH | 45.500 INCHES NOMINAL |
| BBCF | SECOND END SPLINE QUANTITY | 22 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| ABQB | TAPER MAJOR DIAMETER | 0.938 INCHES NOMINAL |