Part Number
Definition:
A STRAIGHT SHAFT HAVING TWO OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE OF 1 TO 125 MICROINCHES (O.O25 TO 3.2 MICROMETERS), ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE (S), KEYWAY(S), SPLINES, THREADS, OR HOLES. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. IT MAY BE DRILLED FOR LUBRICATING HOLES. FOR ITEMS HAVING AN INTEGRAL GEAR(S) OR WORM(S), SEE GEARSHAFT (AS MODIFIED). FOR ITEMS DESIGNED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), STRAIGHT. FOR ITEMS NOT HAVING THE ABOVE CONDITIONS SEE PIN, STRAIGHT, HEADLESS. FOR ITEMS HAVING MACHINED ENDS WHICH CONSTITUTE STEPS SEE SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; AND BOLT, FLUID PASSAGE.
CAGE Information
| Code | Company |
|---|---|
| 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMDL | FIRST END DIAMETER | 0.8730 INCHES MINIMUM AND 0.8735 INCHES MAXIMUM |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| AMJB | SECOND END GROOVED FLAT DEPTH | 0.030 INCHES NOMINAL |
| AMCM | FIRST END DISTANCE FROM END TO FLAT | 0.594 INCHES NOMINAL |
| AMFJ | SECOND END DISTANCE FROM END TO FLAT | 0.594 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | FLAT GROOVED |
| AMJA | SECOND END GROOVED FLAT LENGTH | 1.3750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 5.812 INCHES NOMINAL |
| AMFH | FIRST END GROOVED FLAT DEPTH | 0.030 INCHES NOMINAL |
| AMGT | SECOND END DISTANCE FROM HOLE CENTER TO END | 0.359 INCHES MINIMUM AND 0.375 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | FLAT GROOVE AND CROSS DRILLED HOLE |
| FEAT | SPECIAL FEATURES | BOTH ENDS HAVE ONE ADDITIONAL,IDENT,FLAT GROOVE W/180 DEG ANGLE BTWN FLAT GROOVES |
| AMGS | SECOND END HOLE DIAMETER | 0.2360 INCHES MINIMUM AND 0.2460 INCHES MAXIMUM |
| AMFG | FIRST END GROOVED FLAT LENGTH | 1.3750 INCHES NOMINAL |
| AMFZ | SECOND END DIAMETER | 0.8730 INCHES MINIMUM AND 0.8735 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 8620H |