Part Number
Definition:
A SHAFT HAVING TWO OR MORE DIFFERENT DIAMETERS (GREATER THAN 0.031 INCHES (0.79 MILLIMETER)) ALONG ITS LENGTH. IT MUST HAVE ONE OR MORE OF THE FOLLOWING CONDITIONS: A SPECIFIED SURFACE FINISH DESIGNATION IN THE RANGE 1 TO 125 MICROINCHES (0.025 TO 3.2 MICROMETERS) ARITHMETICAL AVERAGE (AA), MACHINED PERIPHERAL FLAT(S), CIRCULAR GROOVE(S), KEYWAY(S), SPLINES, THREADS, OR HOLES. THE ENDS AND/OR SHOULDERS MAY BE MACHINED TO ACCOMMODATE BEARINGS, COUPLINGS, AND THE LIKE. IT IS NOT DESIGNED FOR USE IN ALIGNING BY FITTING INTO CORRESPONDING HOLES OF ANOTHER ITEM. FOR ITEMS USED TO SUPPORT ROTATING MEMBERS SEE AXLE(1), SHOULDERED. FOR ITEMS NOT HAVING ANY OF THE ABOVE CONDITIONS SEE PIN, SHOULDER, HEADLESS. EXCLUDES SHAFT(1), STRAIGHT; AND AXLE(1), STRAIGHT.
CAGE Information
| Code | Company |
|---|---|
| 04577 | CARLETON TECHNOLOGIES INC |
Federal Supply Class
Title
MISCELLANEOUS POWER TRANSMISSION
Inclusions:
INCLUDES SHAFTS AND SHAFTING; COLLARS; GEARSHAFTS; BALL JOINTS; ACTUATING CYLINDERS.
Exclusions:
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| AMFZ | SECOND END DIAMETER | 0.3125 INCHES NOMINAL |
| AAHN | END SIMILARITY | NOT IDENTICAL |
| MATT | MATERIAL | STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE |
| CSPY | LARGEST STEP DIAMETER | 0.875 INCHES MINIMUM AND 0.885 INCHES MAXIMUM |
| AAHP | SECOND END STYLE | EXTERNAL THREADED |
| ABHP | OVERALL LENGTH | 1.875 INCHES NOMINAL |
| AAGZ | FIRST END STYLE | EXTERNAL THREADED |
| AMDL | FIRST END DIAMETER | 0.3125 INCHES NOMINAL |
| AMHA | SECOND END EXTERNAL THREAD LENGTH | 0.5000 INCHES NOMINAL |
| ATPC | STEP QUANTITY | 3 |
| FEAT | SPECIAL FEATURES | FIRST END HAS TWO SLOTS,PERPENDICULAR TO EACH OTHER,0.074 IN.WIDE BY 0.289 IN.DEEP |
| AMEA | FIRST END EXTERNAL THREAD LENGTH | 0.5000 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM |