Part Number
Part Number:
NSN:
NIIN:
Item Name:
LATHE , ENGINE
Definition:
CAGE Information
| Code | Company |
|---|---|
| 35377 | MAKINO INC |
Federal Supply Class
Title
LATHES
Inclusions:
INCLUDES SCREW MACHINES
Exclusions:
EXCLUDES SPEED LATHES; METAL SPINNING LATHES; CARTRIDGE CASE AND SHELL LATHES.
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| BTWJ | DISTANCE BETWEEN OPEN CENTERS | 84.000 INCHES NOMINAL |
| BTWK | DISTANCE BETWEEN CLOSED CENTERS | 48.000 INCHES NOMINAL |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AGLD | PERFORMANCE TYPE | LIGHT DUTY |
| AWHA | BED TYPE | SLIDING GAP |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND AND POWER |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| APGF | DESIGN TYPE | SCREW |
| BTZR | THREAD QUANTITY RANGE | +2.0/+80.0 PER INCH |
| AAXX | MOUNTING TYPE | FLOOR |
| ELEC | VOLTAGE IN VOLTS | 208.0 |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | HAND AND POWER |
| BTWL | HEADSTOCK DRIVE TYPE | DIRECT PULLEY, BACK GEARED |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 TYPE AND 2418/52 SIZE |
| BTWF | RATED SWING OVER CLOSED GAP | 26.000 INCHES NOMINAL |
| BTWG | ACTUAL SWING OVER CLOSED GAP | 36.000 INCHES NOMINAL |
| BTTG | SWING OVER CROSS SLIDE | 18.000 INCHES NOMINAL |
| FAAZ | PHASE | THREE |
| BTWC | RATED SWING THROUGH OPEN GAP | 52.000 INCHES NOMINAL |
| BTTB | SPINDLE SPEED RANGE IN RPM | +18.0/+720.0 |
| BTWB | THREAD CHANGE QUANTITY | 48 |
| BTYQ | CARRIAGE QUANTITY | 1 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY DISTANCE BETWEEN OPEN CENTERS,DIST BETWEEN CLOSED CENTERS,ELEC MOTOR QUAN,ELEC MOTOR HP RATING,CURRENT TYPE,VOLTAGE IN VOLTS,FREQ IN HERTZ,AND PHASE |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 7.5 |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 48 |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY HEADSTOCK CENTER TAPER SIZE DESIGNATOR,SPINDLE SPEED RANGE IN RPM,VOLTAGE IN VOLTS,AND ADDITIONAL EQUIPMENT PER MIL-STD 931 |
| BTWD | ACTUAL SWING THROUGH OPEN GAP | 36.000 INCHES NOMINAL |
| ACDC | CURRENT TYPE | AC |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 5 MORSE |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CHUCK,3 JAW,10IN.;1 CHUCK,4 JAW,18IN.;COLLET CHUCK AND COLLETS;SIZES 1/16IN. THRU 1 3/8IN.;DRILL CHUCK,1/16IN. TO 1/2IN.;1 FACEPLATE 23 1/2IN.; 1FACEPLATE,GAP,38IN.;1 FACEPLATE JAW FOL 23 1/2IN. FACEPLATE;1 FACEPLATE JAW FOR 38IN. FACEPLATE;1 FOLLOW REST 1/2IN.;1 INDEXING SQUARE TOOL TURRET;1 RESELECT SPEED CHANGE;1 STEADY REST/STD/ 3/4IN. BY 7IN.;1 STEADY REST/OVERSIZE/7IN. BY 12IN.;1 TAPER ATTACHMENT 0 - 3 1/2IN.,1;TOOLS FURNISHED IN ACCORDANCE WITH MFR STD PRACTICE |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 2.188 INCHES NOMINAL |